Brother P-touch PT-D600 - Time and Date Functions; Clock and Date Settings

38
Creating a Barcode Label
EDITING A LABEL
 Setting Barcode Parameters and Entering Barcode Data
NOTE
Symbols are only available for the CODE39, CODE128, CODABAR or
GS1-128 protocols. When not using symbols, after typing in the
barcode data, press ( ) or ( ) to insert the barcode in the
label.
Barcode Settings
()  / [ 條碼 ]  () or ( )  / Select an attribute
 / Set a value for the attribute  ( ) or ( )  Type in the
barcode data
 ()  / Select a character  () or ( )
 ( ) or ( ).
Attribute Value
規格
CODE39, CODE128, EAN-8, EAN-13,
GS1-128 (UCC/EAN-128), UPC-A, UPC-E, I-2/5 (ITF),
CODABAR
寬度
小
大
底部文字
(characters printed
below barcode)
有
無
檢查碼
(check digit)
無
有
(only available for the CODE39, I-2/5
and CODABAR protocols)