Brother P-touch PT-D600 - Printing 傳送標籤 (for Windows ); Creating a Barcode Label

EDITING A LABEL
37
Creating a Barcode Label
 Printing 傳送標籤 (For Windows
®
)
You can transfer labels created with P-touch Editor to the P-touch for
printing. To print the labels transferred from the P-touch Editor, press the
following keys:
NOTE
[ 傳送標籤 ] can be selected when a label created with the P-touch
Editor has been transferred to the P-touch.
For details on the Transfer Manager, visit our website at
http://support.brother.com
Creating a Barcode Label
NOTE
• The P-touch is not designed exclusively for creating barcode labels.
Always check that barcode labels can be read by the barcode reader.
• For best results, print barcode labels in black ink on white tape. Some
barcode readers may not be able to read barcode labels created
using coloured tape or ink.
•
Use the [ 大 ] setting for [ 寬度 ] whenever possible. Some barcode
readers may not be able to read barcode labels created using the [ 小 ]
setting.
• Continuously printing a large number of labels with barcodes can
overheat the print head, which may affect printing quality.
()  / [預設格式 ]  () or ( )  / [傳送標籤 ] 
( ) or ( )
 / Select a transferred label  () or
()
 / [列印 ]  () or ( )  / Select the
number of labels to be printed
 ( ), ( ) or ( ).