Brother P-touch PT-D600 - Resetting & Maintaining Your P-Touch; Resetting the P-Touch; Resetting the Data Using the Home Key; Resetting the Data to Factory Settings Using the P-Touch Keyboard

53
Resetting the P-touch
RESETTING & MAINTAINING YOUR P-TOUCH
Resetting the P-touch
You can reset the internal memory of your P-touch when you want to
clear all saved label files, or if the P-touch is not operating correctly.
 Resetting the Data Using the home key

Resetting the Data to Factory Settings Using the P-touch Keyboard
NOTE
All text, format settings, option settings and saved label files are
cleared when you reset the P-touch.
To reset all the labels and customised settings:
Turn off the P-touch. Press and hold down ( ) and ( ).
While holding down ( ) and ( ), press ( ) once and then
release ( ) and ( ).
NOTE
Release ( ) before releasing the other keys.
()  / [設定 ]  () or ( )  / [重設 ]  () or
()
 / Select the resetting method  () or ( ) 
A confirmation message appears
 () or ( ).
Value Details
重設所有設定
Downloaded labels and transferred labels are NOT
cleared.
The contents in the file memory are also NOT cleared.
Other data is cleared and all settings are reset to the
factory settings.
清除所有內容
Downloaded labels and transferred labels are cleared.
The contents in the file memory are also cleared.
Other data is NOT cleared and settings are NOT reset.
回復出廠模式
All labels and customised settings are reset to the factory
settings.