Brother P-touch PT-D600 - Editing and Deleting a Barcode; Using Time & Date Function; Clock Setting; Time & Date Format Setting

40
Using Time & Date Function
EDITING A LABEL
 Editing and Deleting a Barcode
To edit barcode parameters and barcode data, position the cursor to the
left of the barcode mark on the data entry screen and then open the
Barcode Setup screen by pressing ( ), selecting [ 條碼 ] using or
, and then pressing ( ) or ( ).
To delete a barcode from a label, position the cursor to the right of the
barcode mark on the data entry screen and press ( ).
Using Time & Date Function
You can add the time and date to your label.
 Clock Setting
Set the time and date in the clock setting. After setting the time and date
you can add this information to your label by using the Time & Date
function.
NOTE
• You can also set the time and date by typing in the desired numbers.
• The clock will activate from when the clock setting is applied.
• For the backup of clock setting, when the AC adapter is unplugged,
use AA alkaline batteries (LR6) or fully charged Ni-MH batteries (HR6).
 Time & Date Format Setting
You can select from various formats of the time and date to add to
your label.
The indication of time can be selected between analog and digital style.
US DEL FNC3 FNC2
FNC4 FNC1
Special Character
()  / [設定 ]  () or ( )  / [內建時鐘設定 ] 
( ) or ( )
 / / / Set all time and date settings as
displayed
 ( ) or ( ) to apply the settings.
()  / [設定 ]  ( ) or ( )  / [日期 / 時間格式 ]
 () or ( )  / [日期及時間 ]  / Set the format 
( ) or ( ) to apply the settings.