Brother P-touch PT-D600 - Using 表格格式

36
Using 預設格式 Layouts
EDITING A LABEL
 Using 表格格式
You can set the number of rows and columns for a label to easily create
a template.
NOTE
• There is a maximum number of rows of text that can be entered for
each tape width. A maximum of 7 rows for 24 mm tape, 5 rows for
18 mm tape, 3 rows for 12 mm tape, 2 rows for 9 mm and 6 mm tape.
• 3.5 mm tape cannot be used for table format.
• On the print menu screen:
 Select [ 內容編輯 ] to change the text data or
the barcode setup.
 Select [ 儲存 ] to store the label to the file
memory.
For the file memory, refer to “USING THE FILE MEMORY” on page 51.
 Select [ 選單 ] to change the 英字形、縱印、對齊 or 外框 settings.
 Select [ 預覽 ] to preview the label before printing. Press ( ) to
change the magnification of the LCD screen.
 Select [ 列印選項 ] to set the print settings. For details, refer to “ 自動
跳號 ” on page 45 or “ 鏡像列印 ” on page 45.
• If the width of the current tape cassette does not match the width for
the layout, an error message will display when you try to print the
label. Press ( ) or any other key to clear the error message, and
insert a tape cassette of the correct width.
6mm
1 行 +2 行
Attribute Value Details
()  / [預設格式 ]  () or ( )  / [表格格式 ] 
() or ( )  / Select a tape width  ( ) or ( ) 
/ [
列 ]  / Set a value  / [欄 ]  / Set a value 
( ) or ( )
 Enter text  () or ( )  Repeat for each
text field
 ( ) or ( )  / [列印 ]  ( ) or ( )
 / Select the number of labels to be printed  (), () or
().