Brother P-touch PT-D600 - Tape Cutting Options

46
Setting Tape Cutting Options
LABEL PRINTING
Tape Cutting Options
Setting Description Example
大
Automatically cuts the tape after each
label is printed, leaving a margin of
24.5 mm on each end.
小
Automatically cuts a piece of blank tape
before printing the first label and then
cuts the tape after each label is printed,
leaving a 2 mm margin at both ends of
each label.
省帶
• Automatically cuts a piece of blank
tape before printing the first label and
then cuts the tape after each label is
printed, leaving a 2 mm margin at both
ends of each label.
• Once the last label is printed, the tape
is not fed and cut. Press ( )
and ( ) to feed and cut the tape.
不裁切
• Select this setting when printing
multiple copies of a label and you do
not want the labels cut after each label
is printed, or when using Fabric Tapes
or other special tapes that cannot be
cut by the tape cutter of the P-touch.
• Once the label is printed, the tape is
not fed and cut.
 Press ( ) and ( ) to feed
and cut the tape.
 When using the special tapes that
cannot be cut by the tape cutter of
the P-touch, remove the tape
cassette from the P-touch and use
scissors to cut the tape.
ABC ABC
24.5 mm 24.5 mm
ABC ABC
24.5 mm
2 mm2 mm
ABC ABC
24.5 mm
2 mm2 mm
ABC AB
24.5 mm 4 mm