Brother P-touch PT-D600 - Troubleshooting; Common Problems and Solutions

54
Maintenance
RESETTING & MAINTAINING YOUR P-TOUCH
To reset the customised settings:
(Downloaded label collections, the contents in the file memory, and
transferred labels are not reset.)
Turn off the P-touch. Press and hold down ( ) and ( ). While
holding down ( ) and ( ), press ( ) once and then release
( ) and ( ).
NOTE
Release ( ) before releasing the other keys.
Maintenance
NOTE
Always remove the batteries and disconnect the AC adapter before
cleaning the P-touch.
 Cleaning the Unit
Wipe any dust and marks from the main unit using a soft, dry cloth.
Use a slightly dampened cloth on difficult to remove marks.
NOTE
Do not use paint thinner, benzene, alcohol or any other organic
solvent. These may deform the case or damage the appearance
of your P-touch.
 Cleaning the Print Head
Streaks or poor quality characters on printed labels
generally indicates that the print head is dirty. Clean
the print head using a cotton swab or the optional
print head cleaning cassette (TZe-CL4).
NOTE
• Do not touch the print head directly with your
bare hands.
• Refer to the instructions provided with the print
head cleaning cassette for directions on how to
use it.
Print head