Brother P-touch PT-D600 User Manual

16
Entering and Editing Text
EDITING A LABEL
Use [ 倉頡 ] to enter texts.
Input radicals, and convert Chinese characters word by word.
Example “ 仲 ”
Under [ 倉頡 ] input method, type ( )
().
To clear inputted texts word by word,
press ( ).
To clean all inputted texts, press ( ).
Press ( ) .
Press ( ) or 、 、 or key to convert Chinese
characters, and then press " 仲 ".
Press .
“ 仲 ” will be inputted.
Use [ 簡易倉頡 ] input Method to enter texts
This method is to input the first and last radicals of 倉頡 , and then
convert optional Chinese characters. Follow the steps below to
convert Chinese characters word by word.
Example “ 虎 ”
Under [ 簡易倉頡 ] input method, type
() ().
“ 卜弓 ” will be displayed in reverse, and at
the same time the optional characters will
appear on the screen. If you convert
a Chinese character, it will be confirmed when you input next
character.
• You can input up to 5 Chinese character radicals at one time. If you
want to enter a group of characters, please press ( ) to
convert Chinese characters, and then enter the next character.
1
1
2
3
1
4
1

Brother P-touch PT-D600 Specifications

General

Print Resolution	180 dpi
Max Tape Width	24 mm
Keyboard Type	QWERTY
Connectivity	USB
Model	PT-D600
Category	Label Maker
Tape Sizes	3.5mm, 6mm, 9mm, 12mm, 18mm, 24mm
Cutter	Automatic
Print Method	Thermal transfer
Memory	Up to 99 labels
Display	LCD
Power Source	AC adapter or 6 AA batteries
Tape Type	TZe
Print Speed	30 mm/sec
Label Width	Up to 24 mm
Weight	1.3 kg (without batteries)