Brother RJ-3230B - Change Printer Settings Using Web Based Management

Home > Printer Settings > Change Printer Settings Using Web Based Management
Change Printer Settings Using Web Based Management
You can use a standard web browser to change your printer's settings using the Hyper Text Transfer Protocol
(HTTP) or Hyper Text Transfer Protocol over Secure Socket Layer (HTTPS).
When using Web Based Management, the following operations are available:
• Displaying your printer status information
• Changing network settings, such as TCP/IP information
• Displaying the printer's software version information
• Changing network and printer configuration details
• We recommend Microsoft Internet Explorer 11/Microsoft Edge for Windows. Make sure that JavaScript
and Cookies are always enabled in whichever browser you use.
• The default login password to manage printer settings is located on your machine and marked "Pwd".
We recommend you change it to protect your printer from unauthorised access.
To use Web Based Management, your network must use TCP/IP, and the printer and computer must have a valid
IP address.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as
"SharedPrinter" instead of the IP address.
• For example:
https://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
• For example:
https://brnxxxxxxxxxxxx
3. If the machine prompts you for a password, type it, and then click .
4. Change the printer settings.
Every time you access Web Based Management, type the password in the Login field, and then click .
After configuring the settings, log out by clicking .
Related Information
• Printer Settings
• Set or Change a Login Password for Web Based Management
153