Brother RJ-3230B - Install Printer Drivers and Software on a Computer

Home > Install Software > Install Printer Drivers and Software on a Computer
Install Printer Drivers and Software on a Computer
To print from your computer, install the printer driver and P-touch Editor on your computer.
1. In the address bar, type install.brother and download the Software/Documentation installer.
http://install.brother
2. Double-click the downloaded installer, and follow the on-screen instructions.
NOTE
• To use your printer's advanced features, select the additional software you want during installation.
(RJ-3250WB)
To connect the printer to a computer using a wireless connection, we recommend the following:
• Make a note of the SSID (Network Name) and Password (Network Key) of the wireless network in
advance. If you cannot find this information, contact your network administrator or wireless router/
access point manufacturer.
• To connect the printer to a computer using Wireless Direct, select the USB connection during the
installation. At the end of the installation, click the link for Wireless Direct.
To use the printer with a different connection method than the one selected during installation, use the
installer again to reinstall the software and printer drivers, and select the new connection method.
Related Information
• Install Software
• Available Applications
31