Home > Create and Print Labels Using Your Computer > Create Labels and Print without Installing Software
and Drivers > Print Image Data without Using the Printer Driver
Print Image Data without Using the Printer Driver
• The mass storage mode supports the JPEG image printing.
• The Object Push Profile (OPP) is used for printing via Bluetooth connection.
• The printer converts a colour JPEG image to a monochrome image using a dithering process.
• When sending a monochrome JPEG image, the dithering process may produce a fuzzy image.
• To improve the image quality, try to turn any preprocessing of the JPEG image off.
• Only JPEG images can be printed. (Limited to files with the .jpg extension.)
• The maximum file size is 15.8 MB.
• The maximum resolution is as follows:
- Height × Width = 24000 dots × 576 dots
If these limits are exceeded, the data received by the printer is discarded and not printed.
• Print is at 1 pixel = 1 dot.
• The printer performs binary processing (simple binary) to print the image.
• The image is printed with the height-to-width proportions of the received data.
Related Information
• Create Labels and Print without Installing Software and Drivers
49
To Next Page
Loading...
