Home > Install Software > Connect the Printer to a Computer or Mobile Device > Connect the Printer to a
Computer Using Bluetooth Connection
Connect the Printer to a Computer Using Bluetooth Connection
Follow the manufacturer's recommendations for your Bluetooth-equipped devices (computers and mobile
devices) or Bluetooth adapter, and install any necessary hardware and software.
1. Press the Menu / b (Select) button to select the [Bluetooth] menu, and then press the (Feed) / OK
button.
2. Select the [On/Off] menu, and then press the
(Feed) / OK button. Select[On].
3. Use your Bluetooth management software to discover the printer.
Select the printer name (where XXXX is the last four digits of the printer's serial number). You can find the
serial number label on the base of the printer.
Bluetooth communication is now available.
NOTE
• You can also change the printer’s communication settings using the Printer Setting Tool. For more
information, see Related Information.
• By default, Bluetooth mode is set to [Classic & LE], so two identical Bluetooth names (for Classic
and Low Energy) may appear in your Android device's Bluetooth menu.
• If the passcode appears on the LCD while connecting, check that it is the same as that of the computer or
mobile device, and then press the OK button.
• We recommend setting a new Bluetooth PIN code using the Printer Setting Tool to protect your printer
from unauthorised access.
Related Information
• Connect the Printer to a Computer or Mobile Device
Related Topics:
• Communication Settings of the Printer Setting Tool (Windows)
38
To Next Page
Loading...
