Brother RJ-3230B

To Next Page

To Previous Page

a. Press the Menu / b (Select) button to select the [WLAN] menu, and then press the (Feed) / OK

button.

b. Press the Menu / b (Select) button to select the [Mode] menu, and then press the (Feed) / OK

button.

c. Select [Direct/Infra], and then press the

(Feed) / OK button.

• Using a Windows computer:

a. Launch the Printer Setting Tool on your Windows computer.

b. Click the Communication Settings button.

c. Click General > Communication Settings.

d. Confirm that the Infrastructure and Wireless Direct option is selected for the Selected Interface

setting.

Using WPS (Wi-Fi Protected Setup

™

)

1. First, confirm that your Wi-Fi router/access point has the WPS symbol.

2. Place the printer within the range of your Wi-Fi router/access point.

The range may differ depending on your environment. See the instructions provided with your Wi-Fi router/

access point.

3. Press the WPS button on your Wi-Fi router/access point.

4. On the printer, press the Menu / b (Select) button to select the [WLAN] menu, and then press the

(Feed) / OK button.

5. Press the Menu / b (Select) button to select the [WPS] menu, and then press the (Feed) / OK button.

6. Select [Button Push] or [PIN Code]menu, and then press the

(Feed) / OK button.

For more information, see the instructions provided with your Wi-Fi router/access point. When the connection

is established, the WLAN icon appears on the printer's LCD. Computers and mobile devices that are on the

same network as the printer will have access to the printer.

• The printer will try to connect using WPS for two minutes. If the Menu / b (Select) button is pressed

during that time, the printer will continue trying to connect for an additional two minutes.

• If your computer or mobile device supports the PIN authentication method, select [PIN Code] for

better security.

Related Information

• Connect the Printer to a Computer or Mobile Device

Brother RJ-3230B - Page 41