Brother RJ-3230B - Install the Linerless Platen Kit

Home > Appendix > Optional Accessories > Linerless Platen Kit (Optional: PA-LPR-004) > Install the
Linerless Platen Kit
Install the Linerless Platen Kit
This printer is compatible with linerless media.
Parts Description
Linerless Platen Screws (2)
1. Push the Roll Cover Release Lever to open the Roll Compartment Cover.
a
a. Roll Cover Release Lever
2. Remove the standard platen by removing the two screws shown in the illustration.
CAUTION
Do not touch the blade when removing the standard platen.
Recommended tightening torque: 0.55±0.049 N·m.
3. Install the Linerless Platen, and fasten it using the two screws included in the Linerless Platen Kit.
198