The lower tear bar cannot be used when the Linerless Platen is installed.
4. Set Linerless to On in the Advanced tab of the Printer Setting Tool.
NOTE
• When Linerless is set to On, [Tear Bar] in [Settings] and [Auto Detect] in [Media]
cannot be selected on the printer's LCD.
• For best performance, make sure the paper's head margin is at least 12 mm.
• When using the Linerless Platen, paper dust may stick to the print head. Clean the print head
regularly. For more information, see Related Topics:
• Use the latest firmware when printing with the Linerless Platen.
Related Information
• Linerless Platen Kit (Optional: PA-LPR-004)
Related Topics:
• Maintenance
• Linerless Platen Kit (Optional) Problems
199
To Next Page
Loading...
