Brother RJ-3230B - Settings Tables

Home > Printer Settings > Change Printer Settings Using the Printer > Settings Tables
Settings Tables
The Settings tables describe the menu selections and options.
Some settings may differ depending on the firmware (printer software) version.
>> [WLAN]
>> [Bluetooth]
>> [Wired LAN]
>> [Media]
>> [Settings]
[WLAN]
Level 1
Level 2 Descriptions
On/Off
On / Off Turn the WLAN function on or off.
Mode
Direct / Infrastructure / Direct/
Infra
Select the network mode when you set the WLAN
function to on.
WPS
Button Push / PIN Code Select the WPS network settings method.
WLANAssistant
Start / Back Use the WLAN connection assistant function to
configure your wireless network settings.
IP Address
Display the IP Address.
[Bluetooth]
Level 1
Level 2 Descriptions
On/Off
On / Off Turn the Bluetooth function on or off.
Mode
Classic & LE / Classic / Low
Energy
Select the Bluetooth mode.
AutoReconnect
On / Off Switch to Automatic Reconnection mode (only for Apple
devices: iPad, iPhone, or iPod touch).
Clear History
Delete the information for auto re-paired devices registered in
the printer.
BT Address
Display the Bluetooth address.
Print Barcode
Print the Bluetooth address and corresponding barcode.
[Wired LAN]
Level 1
Level 2 Descriptions
Cradle LAN
On / Off Select the wireless (infrastructure) or wired connection when the printer is placed on the
Charging Cradle.
IP Address
Display the IP Address.
[Media]
Level 1
Level 2 Descriptions
Select Media
- Select the paper size and paper type or check the current paper size setting.
The list contains:
• Default media (Nine types. Default: 76 mm x 44 mm)
• User-defined media (Ten types)
157