Home > Appendix > Optional Accessories > Label Peeler (Optional: PA-LP-007) > Enable the Label Peeler
Function
Enable the Label Peeler Function
When printing using the printer driver, enable the Use Peeler Function setting.
1. Do one of the following:
• Windows 10/Windows Server 2016/Windows Server 2019:
Click Start > Settings > Devices > Printers & scanners. Click the printer you want to set up, and then
click Open queue. Click Printer > Printing Preferences.
• Windows 8.1/Windows Server 2012/Windows Server 2012 R2:
Click Orientation in the Apps screen. Click Hardware and Sound > Devices and Printers. Right-click
the printer you want to set up, and then click the Printing preferences menu.
• Windows 7:
Click Start > Devices and Printers. Right-click the printer you want to set up, and then click the Printing
preferences menu.
2. Select the Use Peeler Function check box.
3. Click OK.
Related Information
• Label Peeler (Optional: PA-LP-007)
196
To Next Page
Loading...
