Brother RJ-3230B - Specifications

Home > Appendix > Specifications
Specifications
>> Printing
>> Printer Size
>> Interface
>> Environment
>> Power Supply
>> Media Specification
>> Compatible Operating Systems
Printing
Printing Technology
Direct Thermal
Print Resolution 203 dpi
Print Speed (depending on the media used)
Maximum 127 mm/s
1
Maximum 127 mm/s (When the Label Peeler is used.)
Maximum 76.2 mm/s (When the Linerless Platen Kit is used.)
Maximum Print Width 72 mm
Maximum Print Length 3000 mm
Minimum Print Length 12.7 mm
1
Using Brother's print test data (10% coverage, 76 mm × 29 mm) at 23°C when performing continuous printing using a USB connection
with a new, fully-charged battery.
Printer Size
Weight (including the battery)
Approximately 807 g
Dimensions Approximately 117 mm (W) x 77 mm (H) x 180 mm (D)
Interface
USB
USB Ver.2.0 (Full Speed) (Type C)
Bluetooth Bluetooth Ver.5.0
SPP, OPP, HCRP (Bluetooth Classic), GATT (Bluetooth Low Energy)
Supported protocol: iAP
Ethernet 10 or 100 Mbps Ethernet (Enabled automatically when the printer is placed on the Charging
Cradle)
Wireless LAN (5
GHz)
IEEE 802.11 a/n, 802.11i, 802.11r, WPS2.0 (Infrastructure Mode)
Wireless LAN (2.4
GHz)
IEEE 802.11 b/g/n, 802.11i, 802.11r, WPS2.0 (Infrastructure Mode)
IEEE 802.11 g/n, 802.11d, 802.11i (Wireless Direct mode)
Protocol (IPv4) ARP, RARP, BOOTP, DHCP, APIPA(Auto IP), WINS/NetBIOS name resolution, DNS
Resolver, mDNS, LLMNR responder LPR, LPD, Custom Raw Port/Port9100, IPP/IPPS, FTP
Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP Server, ICMP,
Web Services (Print), SNTP Client
Protocol (IPv6) NDP, RA, DNS Resolver, mDNS, LLMNR responcer, LPR, LPD, Custom Raw Port/Port9100,
IPP/IPPS, FTP Client and Server, SNMPv1/v2c/v3, HTTP/HTTPS Client and Server, TFTP
Server, ICMP, Web Services (Print), SNTP Client
Network Security
(Wired)
SSL/TLS1.0/1.1/1.2 (HTTPS, IPPS)
SNMPv3, 802.1x (EAP-MD5, EAP-FAST, PEAP, EAP-TLS, EAP-TTLS)
181