Network Security
(Wireless)
SSL/TLS1.0/1.1/1.2 (HTTPS, IPPS)
SNMPv3, 802.1x (EAP-FAST, PEAP, EAP-TLS, EAP-TTLS)
Wireless Network
Security
WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK (AES), WPA3-SAE (AES)
Wireless
Certification
Wi-Fi Certification Mark License (WPA
™
/WPA2
™
/WPA3
™
- Enterprise, Personal), Wi-Fi
Protected Setup
™
(WPS) Identifier Mark License
Environment
Operating
Temperature
Operation:
Battery: From -20°C to 55°C
AC Adapter (Optional): From -10°C to 40°C
Car Adapter (Optional): From -10°C to 50°C
From -20°C to 55°C (When no accessories are used.) (Recommended Temperature is from 0°C to
40°C)
From -10°C to 35°C (When the Label Peeler is used.)
From 10°C to 30°C (When the Linerless Platen Kit is used.)
Charging:
From 0°C to 40°C(Recommended Temperature is from 5°C to 35°C)
If the internal temperature of the battery is out of this range, charging may stop.
Operating
Humidity
From 10% to 90% (without condensation)
50% (When the Label Peeler/Linerless Platen Kit is used.)
Power Supply
Battery
Rechargeable Li-ion battery: 7.2 V
AC Adapter (Optional) AC Adapter (15 V)
Car Adapter (Optional) Car Adapter or Wired type (12 V (DC))
Maximum number of printed labels
1
15,000
Charging time About 3 hours
1
Using Brother's print test data (10% coverage, 76 mm × 29 mm) at 23°C when performing continuous printing using a USB connection
with a new, fully-charged battery.
Media Specification
The media material may affect the print quality.
In order to achieve optimum print results, we recommend using genuine Brother media.
Media Type
Receipt, Gap/Black mark Label, Tag, Linerless (Optional)
Media Width From 25.4 mm to 80 mm
Thickness Receipt: From 0.058 mm to 0.090 mm
Tag: From 0.090 mm to 0.140 mm
Label: From 0.080 mm to 0.170 mm
Roll Outside Diameter (maximum) 66 mm
Media Roll Holder Core Diameter Standard (Grey): 25.4 mm (Default)
In-box (Black): 12.7 mm - 13 mm or 19 mm
Optional (Light Grey): 34.9 mm
Optional (Black): 12 mm - 13 mm
Media Sensor Transmissive, Reflective
182
To Next Page
Loading...
