Brother RJ-3230B - Attach the Belt Clip

Home > Set Up Your Printer > Attach the Belt Clip
Attach the Belt Clip
1. Attach the Belt Clip to the Belt Clip Hook on the printer, as shown:
a
a. Belt Clip Hook
2. Attach the Belt Clip to your belt, as illustrated.
• Make sure you attach the Belt Clip securely to the printer.
• To detach the Belt Clip, reverse the installation procedure.
• We recommend using a belt that is less than 5 mm thick and less than 47.63 mm wide.
Related Information
• Set Up Your Printer
29