Home > Routine Maintenance > Maintenance
Maintenance
Maintenance of the printer may be carried out as required. However, some environments may require more
frequent maintenance (for example, dusty environments).
>> Clean the Printer (Exterior)
>> Clean the Print Head
>> Clean the Roller
>> Clean the Paper Exit Slot
>> Linerless Platen Maintenance
>> Label Peeler Maintenance
Clean the Printer (Exterior)
• Wipe any dust and marks from the printer's exterior using a soft, dry cloth. Use a cloth slightly damp with
water on difficult to remove marks.
IMPORTANT
Do not use paint thinner, benzene, alcohol, or any other organic solvent. These may deform or damage
the printer.
Clean the Print Head
• Wipe the print head with a lint-free cloth dipped in isopropyl alcohol or ethanol. Carry out the maintenance
frequently.
1. Print Head
Use the isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.
Clean the Roller
• Wipe the roller with a lint-free cloth dipped in isopropyl alcohol or ethanol. After cleaning the roller, make sure
that no lint or other material remains on the roller.
1. Roller
Use the isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.
161
To Next Page
Loading...
