Clean the Paper Exit Slot
• If adhesive accumulates at the paper exit slot and media becomes jammed, or if the paper exit slot becomes
dirty, wipe the paper exit slot with a lint-free cloth dipped in isopropyl alcohol or ethanol.
1. Paper Exit Slot
Use the isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.
Linerless Platen Maintenance
When using the Linerless Platen Kit (PA-LPR-004), paper dust may stick to the print head.
• Clean the print head regularly with a lint-free cloth or cotton swab dipped in isopropyl alcohol or ethanol as
shown in the illustration.
After cleaning the print head, make sure that no lint or other material remains on the print head.
- Do not clean the roller of the Linerless Platen to prevent its deterioration.
- Use the isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.
Label Peeler Maintenance
When using the Label Peeler (PA-LP-007), adhesive may accumulate at the slot and roller parts, resulting in a
media jam, or the slot and roller parts may become dirty.
• Wipe the paper exit slot, peeler roller, and platen roller with a lint-free cloth dipped in isopropyl alcohol or
ethanol as shown in the illustration.
1. Paper Exit Slot
2. Peeler Roller
3. Platen Roller
Use the isopropyl alcohol or ethanol according to the manufacturer's safety guidelines, as applicable.
162
To Next Page
Loading...
