Brother S-7300A-403P - Simple Home Screen Functions; Simple Home Screen Layout; Shortcut Key Assignments

S-7300A
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
22
5-2-2. Description of simple home screen
* The assignments for shortcut keys 1 to 4 can be changed.
(Refer to "6-5. Assigning functions to shortcut keys".)
(1)
Screen lock key
Press this key to switch the home screen between locked and unlocked.
NOTE:
At the time of shipment from the factory, the screen is set to lock automatically
if no operations are carried out for
one minute. (Refer to memory switch
MSW-310.)
Screen unlock key
(2)
Illumination LED on key
Press this key to switch the illumination LED between on and off.
If you keep pressing this key, the display switches to the illumination LED
brightness setting screen.
Illumination LED off key
(3)
Program No. UP key
Press this key to increase the program number.
Program No. DOWN
key
Press this key to decrease the program number.
(4)
Main stitch pitch key
If you keep pressing this key, the display switches to the stitch pitch setting screen.
(5)
Main sewing speed key
If you keep pressing this key, the display switches to the main sewing speed
setting screen.
(6)
Production counter key
If you keep pressing this key while the production counter is displayed, the display
switches to the production counter setting screen.
(7)
Lower thread counter
key
If you keep pressing this key while the production counter is displayed, the display
switches to the production counter setting screen.
(8)
Shortcut 1 key
This key is set to operate as a "Start backtack key" at the time of shipment from
the factory.
(9)
Shortcut 2 key
This key is set to operate as an "End backtack key" at the time of shipment from
the factory.
(10)
Shortcut 3 key
This key is set to operate as a "Slow start key" at the time of shipment from the
factory.
(11)
Shortcut 4 key
This key is set to operate as a "Thread trimming lock key" at the time of shipment
from the factory.
(11)
(6)
(4)
Program No.
Main stitch pitch
Main sewing speed
Target counter
Production counter
Lower thread counter
(1)
(2)
(3)
(5)
(7)
(8)
(9)
(10)