Brother S-7300A-403P - Initial Test Operation; Powering On and Initial Display; Treadle Operation Test

S-7300A
3. INSTALLATION
14
3-5. Test operation (Operating the treadle)
C A U TIO N
Do not touch any of the moving parts or press any objects against the machine while sewing, as this may
result in personal injury or damage to the machine.
1. Turning on the power
Press the ON power switch (1).
The power indicator (2) will illuminate.
The display (3) of the operation panel will change in the order
shown in the illustration. (During this time, the feed
mechanism will return to the home position.)
0893D