BRP Lynx Commander 600 E-TEC - Page 104

MAINTENANCE SCHEDULE (4-STROKE)
EVERY 6 000 KM (4,000 MI) OR 2 YEARS
(WHICHEVER COMES FIRST)
Replace fuel filter
FUEL
SYSTEM
Replace fuel pump outlet filter (ACE)
Replace drive pulley slider shoes, O-ring and rollers an d inspect ramps
(1200 4-TEC and 900 ACE)
Replace brake fluid
Lubricate the splines of joint between QRS axle and gearbox
DRIVE
SYSTEM AND
BRAKE
Lubricate the splines of joint between driven pulley and QRS axle
FRAME
Retighten rear member screws to frame to specified torque (XU)
24 N•m (18 lbf•ft)
EVERY 10 0 00 KM (6,000 MI) OR 3 YEARS
(WHICHEVER COMES FIRST)
ELECTRICAL
SYSTEM
Replace spark plugs
EVERY 20 000 KM (12,500 MI)
ENGINE
Check valve clearance and adjust if necessary. (1200 4-TEC)
EVERY 5 YEARS
ENGINE
Replace engine coolant
______________
101