BRP Lynx Commander 600 E-TEC - How to Read Fault Codes

MONITORING SYSTEM
How to Read Fault Codes
Mu ltifunction Analog/Dig ital
Display Only
To read any active fault code, press
and hold MODE (M) Button and simul-
taneously depress the HI/LOW beam
switch repeatedly several times.
If two or more codes are registered,
use SET (S) or MODE (M) to scroll.
To exit the fault codes mode, press and
hold MODE (M) Button.
Contact an authorized Lynx dealer for
code signification.
158
______________