EasyManua.ls Logo

BRP Lynx Commander 600 E-TEC - Tune Your Ride

BRP Lynx Commander 600 E-TEC
181 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TUNE YOUR RIDE
WARNING
Suspension adjustment could af-
fect vehicle handling. Always take
time to familiarize yourself with
the vehicle's behavior after any
suspension adjustment have been
made.
Snowmobile handling and comfort de-
pend upon suspension adjustments.
Choice of suspension adjustments
vary with carrying load, driver's weight,
personal preference, riding speed and
field condition.
WARNING
Before proceeding with any sus-
pension adjustment, remember:
Park in a safe place.
Remove the tether cord cap
from the engine cut-off switch.
Use appropriate lifting device or
have assistanc e to share lifting
stress. If a lifting device is not
used, use proper lifting tech-
niques, notably using your legs
force.
Do not attempt to lift the front or
rear of vehicle if it is above your
limits.
Support front of vehicle off the
ground with a suitable device
before adjusting suspension.
Support rear of vehicle off the
ground with a wide-base snow-
mobile stand with a rear deflec-
tor panel.
Make sure support device is sta-
ble and secure.
Customize each adjustment one at
a time. It may be necessary to read-
just center spring after adjusting front
springs for instance. Test run the
snowmobile under the same condi-
tions; trail, speed, snow, d river riding
position, etc. Change one adjustment
and retest. Proceed methodically until
you are satisfied.
Followin g are gu idelines to fine-tune
suspension.
84
______________

Table of Contents

Related product manuals