SPECIFICATIONS
SYSTEM MODELS
ENGINE 600 HO E-TEC
Engine type Rotax
®
593, liquid c ooled w/Reed valve, 3D-RAVE
Cylinders
2
Displacement 594.4 cm³ (36.27 in³)
Bore 72 mm (2.83 in)
Stroke 73 mm (2.87 in)
Maximum horsepower engine RPM 8100 RPM
Fuel injection system E-TEC direct injection
Exhaust system Single tuned pipe, baffle muffler
Injection oil
Scandinavia :
2T E-TEC SYNTHETIC
OIL (EUR) (P/N 779281)
or
2T CARBURATED PREMIUM
MINERAL OIL (EUR) (P/N 779276)
All other countries:2T E-TEC
SYNTHETIC OIL (P/N 779126)
or
2T CARBURATED PREMIUM
MINERAL OIL (P/N 779119)
or equivalent. Refer to
RECOMMENDED OIL
Injection oil tank capacity 2.9 L (3.06 qt (U.S. liq.))
Coolant
Ethyl glycol/water mix (50%
coolant, 50% distilled water).
Scandinavia:
EXTENDED LIFE
PRE-MIXED COOLANT (EUR) (P/N 779223)
All other countries: EXTENDED LIFE PRE-MIXED
COOLANT (P/N 779150)
or coolant specifically
designed for aluminum engines
Cooling system capacity 5.5 L (5.81 qt (U.S. liq.))
Recommended fuel type
Premium unleaded
Refer to
FUEL REQUIREMENTS
Minimum octane rating 95 (Fuel which may contain up to 10% ethanol)
Fuel tank capacity 39 L (10.3 U.S. gal.)
______________
137
To Next Page
Loading...
