SPECIFICATIONS
ENGINE
800R E-TEC
Engine type Rotax
®
797, liquid c ooled w/Reed valve, 3D-RAVE
Cylinders
2
Displacement 799.5 cm³ (48.79 in³)
Bore 82 mm (3.23 in)
Stroke 75.7 mm (2.98 in)
Maximum horsepower engine RPM 7900 RPM
Fuel injection system E-TEC direct injection
Exhaust system Single tuned pipe, baffle muffler
Injection oil
Scandinavia :
2T E-TEC SYNTHETIC
OIL (EUR) (P/N 779281)
or
2T CARBURATED PREMIUM
MINERAL OIL (EUR) (P/N 779276)
All other countries: 2T E-TEC
SYNTHETIC OIL (P/N 779126)
or
2T CARBURATED PREMIUM
MINERAL OIL (P/N 779119)
or equivalent. Refer to
RECOMMENDED OIL
Injection oil tank capacity 2.9 L (3.06 qt (U.S. liq.))
Coolant
Ethyl glycol/water mix (50% coolant, 50% distilled
water). Scandinavia: Use
EXTENDED LIFE
PRE-MIXED COOLANT (EUR) (P/N 779223)
All other countries: UseEXTENDED LIFE
PRE-MIXED COOLANT (P/N 779150)
or coolant
specifically designed for aluminum engines
Cooling system capacity 6.2 L (6.55 qt (U.S. liq.))
Recommended fuel type
Premium unleaded
Refer to
FUEL REQUIREMENTS
Minimum octane rating 95 (Fuel which may contain up to 10% ethanol)
Fuel tank capacity 39 L (10.3 U.S. gal.)
138
______________
To Next Page
Loading...
