EasyManua.ls Logo

BRP Lynx Commander 600 E-TEC - Page 132

BRP Lynx Commander 600 E-TEC
181 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRESEASON PREPARATION
PRESEASON PREPARATION (4-STROKE)
Visually inspect engine seals and gaskets and check for leaks
Check exhaust system condition and check for leaks
Change engine oil a nd filter
ENGINE
Check coolant density
Inspect fuel lines and connections
FUEL
SYSTEM
Clean and inspect throttle body
Inspect drive belt (adjust at every drive belt replacement)
Clean and visually inspect drive pulley
Clean and inspect driven pulley
Inspect, adjust and align track
Adjust drive chain (Not for models equipped with gearbox)
Change chaincase / gearbox oil
Change NEW gasket ring with gearbox oil change. Apply LOCTITE 542
on the thread of the plug (XU models)
Check brake fluid level
DRIVE
SYSTEM AND
BRAKE
Inspect brake hose, pads and disk
Inspect steering mechanism
STEERING
SYSTEM
Inspect skis and runners
Inspect front suspension
SUSPENSION
Inspect rear suspension and stopper strap.
Charge battery (if so equipped)
ELECTRICAL
SYSTEM
Adjust headlight beam aiming
______________
129

Table of Contents

Related product manuals