EasyManua.ls Logo

BRP Lynx Commander 600 E-TEC - Page 39

BRP Lynx Commander 600 E-TEC
181 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IMPORTANT ON-PRODUCT LABELS
516005876
LABEL 2
Not applying the recommended torque may result in a major failure of the drive
pulley and the engine.Refer to the shop manual for the complete assembly procedure
Drive pulley bolt recommended torque
85-92 lbf·ft / 115-125N·m
NOTICE
EN-516005503A-DEC
ON PU LLEY GUARD - LABEL 3
516003925
LABEL 4
516003918
LABEL 5
516005109
COMMANDER GT (COMFORT KIT) AND
69 RANGER SNOWCRUISE MODELS - ON
PASSENGER HANDHOLD
516007443
The engine of this snowmobile has been developed
and validated using the BRP XPS
TM
approved lubricant.
BRP recommends the use of its XPS
TM
approved
lubricant or equivalent.
Damages caused by oil which is not suitable for this
engine may not be covered by the BRP limited warranty.
See the operator s guide.
516007443
2-TEC- MODELS - ON ENGINE
COMPARTMENT
36
_______
SAFETY I
NFORMATION
________

Table of Contents

Related product manuals