Measuring Ampifier Type 2525
User Manual Vol.2
6–15
BE1394– 11
Chapter 6 – Set-up and Display (Results) Messages
Measurement Set-up Commands
6.3.10 Auto_Range
The command syntax for Auto_Range is shown in Fig.6.24.
The syntax diagram for the query Auto_Range?, and the amplifier’s response is
shown in Fig.6.25. The default value is OFf. The autorange value returned by the
amplifier is the current setting for Auto_Range.
Fig.6.24 The syntax for the command Auto_Range
Fig.6.25 The syntax for the query Auto_Range? and amplifier response
941118e
Te
CHANNEL_1 AUTO_RANGE
OFF
To 2525
: SP
—
:
ON_OUTPUT_GAIN_ONLY
ON_INPUT_AND_OUTPUT_GAIN
941108e
Te
CHANNEL_1
CHANNEL_1
AUTO_RANGE?
To 2525
:
Header OFf
Te
From 2525
:
Autorange Value
Char
SP
—
:
AUTO_RANGE
:
To Next Page
Loading...
