Transport, Packaging and Storage
E1400912_1_001 17
3.3 Packaging
About Packaging
The individual packages are packaged in accordance with anticipated transport conditions.
Only environmentally friendly materials have been used in the packaging.
The packaging is intended to protect the individual components from transport damage,
corrosion and other damage prior to assembly. Therefore do not destroy the packaging and
only remove it shortly before assembly.
It is recommended to store the packaging for later use in the event that you need to return the
unit to Bruker.
Handling Packaging Materials
Dispose of packaging material in accordance with the relevant applicable legal requirements
and local regulations (see Dismantling and Disposal [}77]).
3.4 Storage
Storage of the Packages
Store the packages under the following conditions:
• Do not store outdoors.
• Store in dry and dust-free conditions.
• Do not expose to aggressive media.
• Protect against direct sunlight.
• Avoid mechanical shocks.
• Storage temperature: 15 to 35 °C.
• Relative humidity: max. 60%.
• If stored for longer than 3 months, regularly check the general condition of all parts and
the packaging. If necessary, top-up or replace preservatives.
Note: Under certain circumstances, storage instructions may be affixed to packages which
expand the requirements specified here. Comply with these accordingly.
To Next Page
Loading...
Need help?
General
