Running the minispec mq20 Toothpaste Analyzer
34 E1400912_1_001
You will now be transferred to the main menu of minispec Plus.
Figure7.2: The minispec Plus Main Menu
7.2.1 Daily Check
As a first action, chose to run the Daily Check function to validate the mq20 Toothpaste
Analyzer system. The software will now guide you through the procedure, requesting the
Daily Check sample. Insert the corresponding sample with care into your NMR system.
Finally the test should conclude and the instrument should be valid for 24 hours. In case
there is a Daily Check failure, it is recommended to run the Update Settings procedure and to
follow the corresponding instructions. In any case if the Update Settings routine does not run
automatically, the Daily Check procedure has to be repeated.
To Next Page
Loading...
Need help?
General
