minispec.exe Software for Diagnostic and Service Purposes
E1400912_1_001 55
You can modify the default data saving behavior using Measured Data Backup every....
To include an output of the instrument and acquisition parameter settings, select Settings
Print Out in Results Header. These settings are dependent on the minispec applications.
The Print Command
Use this command to print a document. It opens a Print Dialog Box, where you may specify
the range of pages to be printed, the number of copies, the destination printer, and other
printer setup options.
Shortcuts: Standard Tool Bar:
Keys: CTRL+P
The Print Preview Command
Use this command to display the active document as it would appear when printed. The main
window will be replaced with a print preview window in which one or two pages will be
displayed in their print format. The Print Preview toolbar offers options to view either one or
two pages at a time, movement back and forth through the document, zoom in and out of
pages and to initiate a print job.
The Print Setup Command
Use this command to select a printer and a printer connection. This command presents a
Print Setup dialog box where the printer and its connection are specified.
The 1, 2, 3, 4, 5 Commands
Use the numbers and filenames listed at the bottom of the File menu to open the last five
documents you closed. Select the document you want to open.
The Exit Command
Use this command to end your minispec session. You can also use the Close command. The
minispec software prompts you to save documents when unsaved changes exist.
Shortcuts: Headline:
Keys: ALT+F4
To Next Page
Loading...
Need help?
General
