Chassis 0000
Disassembling the platform
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 8 – 5
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
8.3 Disassembling the platform
1. Apply a load on the platform and loosen the upper dampening stop
together with the spring cover plate.
2. Disassemble the platform from the truck by loosening the four
bolts.
3. Put the platform on the floor behind the truck with the spring facing
you and placing the other edge under the truck's foot guard.
4. Loosen all 8 screws securing the bracket, which the spring clamp is
pushing against.
https://www.besttruckmanuals.com/
To Next Page
Loading...
