17 – 6 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Hydraulic system 6000
Hydraulic connections 6230
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
17.4 Hydraulic connections 6230
17.4.1 Quick change connector
Assembling the quick change connector
1. Place the assembly stop (1) on the male fitting and make
sure that the dismantling ring (2) runs freely in the groove.
2. Push the male fitting into the female fitting until the assembly
stop makes contact with the female fitting.
3. The coupling is now made and locked.
https://www.besttruckmanuals.com/
To Next Page
Loading...
