BT SWE120L - Charging the Battery; Main Charging; Equalising Charging; Charging Completed

19 – 4 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Accessories
Built-in battery charger
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
19.5.2 Charging the battery
To start charging, open the battery compartment cover and connect the
charger connector to a wall outlet.
Note:
Prior to commencing charging, switch off the truck and disconnect all
other electrical connections to the truck.
When the truck is charging, the following is shown on the display:
Main charging
During the charging process, lines appear sequentially from left to right.
The battery symbol and the OFF button blink.
Equalising charging
Four lines at the left in the display light continuously while four lines on
the right appear sequentially. The battery symbol and the OFF button
blink.
Charging completed
The battery capacity value and unit (Ah) appear alternately in the
display. The battery symbol is lit continuously, while the OFF button
blinks.
Disconnect the connector from the wall outlet when the battery has
been charged. The OFF button is then lit continuously. The truck is now
ready for use.
https://www.besttruckmanuals.com/