16 – 2 Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D © BT
Electrical components
Replacing the wiring harness
T code Valid from serial no. Date Order no.
841×842×843 6061850- 2012-08-30 258946-120
The bracket (C) remains on the connector panel.
16.1.1 Replacing the transistor regulator
cables
Keep the following in mind if it becomes necessary to disconnect the
connector (A) of the transistor regulator:
• First press down on the bracket clamp (B).
• Then lift up the connector lever (C).
A
B
C
https://www.besttruckmanuals.com/
To Next Page
Loading...
