Installation
Setting the parameters
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 4 – 5
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
4.4 Setting the parameters
The parameters that are handled in this chapter are only the
parameters that need to be adjusted when putting the truck into
operation and that require more detailed description. For more
information about parameters, see the chapter Functions and
parameters.
Check that parameters are adjusted to desire values with regards to
• maximum speed, driver parameter - see chapter Functions and
parameters
• acceleration, driver parameter - see chapter Functions and
parameters
• internal braking, driver parameter - see chapter Functions and
parameters
• Collision sensor (option)
• battery
• battery charger (option)
Note!
When you check or adjust parameters, remember to write down, in a
truck report for example, the truck's specific parameter values.
Separate information about the truck specific parameters are good to
have e.g. in case of truck breakdown, since the information cannot be
received in another way.
https://www.besttruckmanuals.com/
To Next Page
Loading...
