BT SWE120L - 4.5 Function and safety check

Installation
Function and safety check
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 4 – 11
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
4.5 Function and safety check
Before the truck is put into operation, the following points must be
checked.
Pos. Inspection point Action Duration scale
a Operating control Check function 2:25 minutes
b Safety reversing switch Check function
c Horn Check function
d Steering Check function
e Brake Check function
f Emergency switch Check function
g Hydraulic system Check all components
h Drive unit Investigate possible noises and oil leaks
j Wheel Investigate damage, remove dirt etc.
k Chassis Investigate damage, remove dirt etc.
m Battery cover and lock Check function
n Battery Check acid and charging level
o Fork carriage Investigate damage, remove dirt etc.
p Support arms Investigate damage, remove dirt etc.
q Mast Investigate damage, remove dirt etc.
a,e
b
c
d
f
g
h
j
j
k
m
n
o
p
q
https://www.besttruckmanuals.com/