Drive gear 2550
Removing the gear from the truck (not applicable for SWE120S)
© BT Repair manual SWE100, 120, 120L, 120S, 140, 140L, 200D 10 – 3
Order no.. Date Valid from serial no. T code
258946-120 2012-08-30 6061850- 841×842×843
10. Lift the motor bracket using the threaded rod until the drive wheel is
lifted approx. 4 mm from the floor.
11. Unscrew the retaining screws of the gear box.
12. Lift carefully approx. 125 mm lay the gear down on the floor.
13. Lift a further 100 mm, a total of 225 mm and pull it out to the rear
edge.
Install in reverse order.
Please note the risk of crushing when installing the unit.
Steps 12, 13
https://www.besttruckmanuals.com/
To Next Page
Loading...
