VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
CTCSS
CTCSS is set with menus 11 R-CTCS and 13 T-CTCS.
For a complete list of available CTCSS codes and corresponding sub-tone frequencies, see Table
C.2, “CTCSS Frequencies” in Appendix C, Technical specifications.
Procedure 9.1. CTCSS setup how-to
1. Press the key to enter the menu.
2. Enter on the numeric keypad to get to receiver CTCSS.
3. Press to select.
4. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad.
5. Press to confirm and save.
6. Enter on the numeric keypad to go to transmitter CTCSS.
7. Press to select.
8. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad. Make sure
it's the same frequency as that you entered for receiver CTCSS.
9. Press to confirm and save.
10. Press to exit the menu system.
To turn CTCSS off, follow the same procedure but set it to off with the key instead of
To Next Page
Loading...
