VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
selecting a CTCSS sub-tone frequency.
For more information see the section called “11 R-CTCS - Receiver CTCSS” and the section called
“13 T-CTCS - Transmitter CTCSS” in Appendix B, Menu definitions.
DCS
DCS is set with menus 10 R-DCS and 12 T-DCS.
For a complete list of available DCS codes, see Table C.1, “DCS Codes” in Appendix C,
Technical specifications.
Procedure 9.2. DCS setup how-to
1. Press the key to enter the menu.
2. Enter on the numeric keypad to get to receiver DCS.
3. Press to select.
4. Enter desired DCS code on the numeric keypad.
5. Press to confirm and save.
6. Enter on the numeric keypad to go to transmitter DCS.
7. Press to select.
8. Enter desired DCS code on the numeric keypad. Make sure it's the same code as that
you entered for receiver DCS.
9. Press to confirm and save.
To Next Page
Loading...
