BTECH GMRS-V2 - Page 66

60
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-V2!
!
!
!
Menu
Name
- Full Name
Settings [Keypad Shortcut]
Description
0
SQL - Squelch
Level
[0 - 9]
Setting the squelch to 0 will
open up the squelch entirely.
Mutes the speaker of the transceiver in the absence of a
strong signal. Squelch is either OFF or one of 9 levels.
The higher the level, the stronger the signal must be to
un-mute the speaker.
1
STEP -
Frequency
Step
2.5K[0] - 5.0K[1] - 6.25K[2] - 10.0K[3]
- 12.5K[4] - 20.0K[5] - 25.0K[6] -
50.0K[7]
Selects the amount of frequency change in
VFO/Frequency mode when scanning or pressing the
or keys.
2
TXP -
Transmit
Power
HIGH [0] - LOW [1]
Selects between HIGH and LOW transmitter power when
in VFO/Frequency mode. Use the minimum transmitter
power necessary to carry out the desired
communications.
3
SAVE -
Battery Save
OFF [0] - 1 - 2 - 3 - 4
Selects the ratio of sleep cycles to awake cycles (1:1, 2:1,
3:1, 4:1). The higher the number the longer the battery
lasts. When enabled, a word or two might be missed
when the frequency being monitored becomes active.
4
VOX - Voice
Operated TX
OFF [0] - 1 - 2 - 3 - 4 - 5 - 6 –
7 - 8 - 9 - 10
When enabled it is not necessary to push the [PTT]
button on the transceiver. Adjust the gain level to an
appropriate sensitivity to allow smooth transmission.
5
WN -
Wideband /
Narrowband
WIDE [0] - NARR [1]
Wideband (25 kHz bandwidth) or narrowband (12.5 kHz
bandwidth).