BTECH GMRS-V2 - Page 71

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
65
23
BCL - Busy
Channel
Lock-out
OFF [0] - ON [1]
Disables the [PTT] button on a channel that is already in
use. The transceiver will sound a beep tone and will not
transmit if the [PTT] button is pressed when a channel is
already in use.
24
SYNC –
Display Sync
OFF [0] - ON [1]
Display A and B are synced. This allows the upper display
to show channel Name while the lower shows the
Frequency. (Use with MENU 21 and 22)
25
SFT-D -
Frequency
Shift
Direction
Not Available
UNUSED SETTING
26
OFFSET -
Frequency
shift amount
Not Available
UNUSED SETTING
27
RCH-AD -
Store a
Memory
Channel
000 - 199
This menu is used to either create new or modify
existing channels so that they can be accessed from
MR/Channel Mode.
28
DEL-CH -
Delete a
memory
channel
000 - 199
This menu is used to delete the programmed
information from the specified channel so that it can
either be programmed again or be left empty.