BTECH GMRS-V2 - Page 74

68
VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
!
GMRS-V2!
!
!
!
40
R-TONE –
Repeater
Tone
1000 HZ [0] - 1450 HZ [1] -
1750 HZ [2] -2100 HZ [3]
The R-TONE frequency is transmitted by pressing the [F]
side key while the [PTT] button is also pressed.
A common tone burst frequency used by many amateur
radio systems in Europe is 1,750 Hz
41
SC-ADD –
Scan Add
OFF [0] - ON [1]
- ON Adds the current channel to the scan list
- OFF Removes the current channel from the scan list
42
A/B-BP
OFF [0] / A / B
Tone at End of Reception - Receiver tone prior to
squelch closing. - An audible indication of which display
was in use.
43
GCH-AD
GMRS Channel Add
Add GMRS channels to memory channels between
000 to 199
44
NCH-AD
NOAA Channel Add
Add NOAA channels to memory channels between
000 to 199
45
RESET -
Restore
defaults
VFO [0] - ALL [1]
Resets the radio to factory defaults