Buderus Logamatic 4211 User Manual

Standard functions
6
Logamatic 4211 - Subject to technical modifications.
19
6.3.1 Selecting automatic mode
In automatic mode your heating system will operate with the time switch
program, i.e. central and DHW heating at preset times.
Example: Enabling automatic mode
Press "AUT".
The "AUT" LED illuminates; automatic mode is enabled.
In addition, either the "Day mode" or "Night mode" LED will illuminate. This is
subject to the set times for day and night mode.
Automatic day and night mode
At fixed times, central heating is provided or the room temperature is set back.
6.3.2 Selecting manual mode
Press either "Day mode" or "Night mode" to change to manual mode.
Press "Day mode".
The "Day mode" LED illuminates. Now your heating system is in constant day
mode (standard mode).
Press "Night mode".
The "Night mode" LED illuminates. Your heating system is now in constant night
mode (setback mode), and operates at a lower room temperature.
AUT
Set room
Automatic day
21°C
Fig. 9 Changeover from day and night mode at fixed times (example)
1 Day mode
2 Night mode
7 747 012 053-18.1RS
1
2
05:30
22:00
21 °C
17 °C
Set room
Constant day
21°C
Set room
Constant night
17°C
USER INFORMATION
If you have selected manual mode, other automatic controls will also be
switched off, e.g. the summer/winter time adjustment (Æ Chapter 7.13).

Buderus Logamatic 4211 Specifications

General

Brand	Buderus
Model	Logamatic 4211
Category	Control Unit
Language	English