Buderus Logamatic 4211 - Changing the Permanent Display

Extended functions
7
Logamatic 4211 - Subject to technical modifications.
27
7.4 Changing the permanent display
You can determine the permanent display of the programming unit.
The following permanent displays are available:
– Common flow (if MEC2 is installed as a wall mounted unit)
– Outside temp.
– DHW*
– Time
– Date
* Only if DHW is installed.
Hold the "Display" key down, and select the required permanent display with the
rotary selector (here: "Date").
Release "Display" key. The selected permanent display has now been saved.
AUT
+
Common flow
Date
20.08.2001
45°C