Extended functions
7
Logamatic 4211 - Subject to technical modifications.
34
7.9 Selecting and modifying a heating program
7.9.1 What is a heating program?
A heating program provides automatic changeover between operating modes
(day and night mode) at fixed times. This automatic changeover is effected via
a time switch.
Before you utilise this option, consider the following:
– At what time in the morning should your home be warm? Is this time also
subject to the day of the week?
– Are there days when you don't want to heat?
– From what time in the evening do you no longer need to heat? This may also
depend on the day of the week.
The length of time your heating system takes to heat up individual rooms may
vary. This will be subject to the outside temperature, the building insulation and
the room temperature setback.
The "Optimisation" function of the programming unit calculates the various heat-
up times. Ask your heating contractor whether this function has been enabled. If
so, all you need to do is enter the times at which your home should be warm.
With the programming unit, Buderus offers eight different, preset heating
programs as standard programs.
Fig. 12 Example for a standard program (here: "Family program" from Monday to
Thursday)
1 Day mode
2 Night mode
7 747 012 053-16.1RS
1
2
05:30
22:00
USER INFORMATION
After commissioning, check whether the selected heating program suits your
lifestyle. If not, several options are available for matching the heating program
to your individual requirements.
To Next Page
Loading...
Need help?
General
